# \[Archive\] Solar Array Interactor Model

**URL:** <https://forum.spis.org/t/archive-solar-array-interactor-model/717>\
**Category:** SPIS\
**Created:** [11 August 2016 15:30 UTC](https://forum.spis.org/t/archive-solar-array-interactor-model/717 "2016-08-11T15:30:00Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://forum.spis.org/uploads/default/original/1X/887f7e402a70666bad1816db2c64fefd698b4b0f.png) [@system](https://forum.spis.org/u/system)\
**Post date:** [11 August 2016 15:30 UTC](https://forum.spis.org/t/archive-solar-array-interactor-model/717/1 "2016-08-11T15:30:00Z")

</div>

Message by **Alessandro Vicini** :  
I am trying to use the Solar Array Interactor model, as described in the User Manual Annex 2 - Advanced use for scientific applications.  
I have the following questions:

1. In order to activate the model is it also necessary to set InteractorFlag1 to 1? (in the manual only InteractorNb =1 is prescribed, no mention about InteractorFlag1)

2. The first value in the Interactor1\_SolarArrayDescriptor.txt file is the “effective area ratio”  
is this to be intended as the ratio between the exposed interconnects surface and the total panel surface?

3. Is the following a correct format for the Interactor1\_SolarArrayDescriptor.txt file? It should represent a solar panel divided into 12 strings of cells.

1. Effective area ratio

### # Basis definition
 -0.7565 -0.5120 -0.1800 1.0000 0.0000 0.0000 0.0000 1.0000 0.0000
1. Solar Array definition

 -0.7565 -0.5120 -0.0965 -0.4267 0.0000 37.8788 0.0000 -0.7565 -0.4267 -0.0965 -0.3413 25.0000 -37.8788 0.0000 -0.7565 -0.3413 -0.0965 -0.2560 0.0000 37.8788 0.0000 -0.7565 -0.2560 -0.0965 -0.1707 25.0000 -37.8788 0.0000 -0.7565 -0.1707 -0.0965 -0.0853 0.0000 37.8788 0.0000 -0.7565 -0.0853 -0.0965 0.0000 25.0000 -37.8788 0.0000 -0.7565 0.0000 -0.0965 0.0853 0.0000 37.8788 0.0000 -0.7565 0.0853 -0.0965 0.1707 25.0000 -37.8788 0.0000 -0.7565 0.1707 -0.0965 0.2560 0.0000 37.8788 0.0000 -0.7565 0.2560 -0.0965 0.3413 25.0000 -37.8788 0.0000 -0.7565 0.3413 -0.0965 0.4267 0.0000 37.8788 0.0000 -0.7565 0.4267 -0.0965 0.5120 25.0000 -37.8788 0.0000

---

<div class="post-metadata">

**Author:** ![system](https://forum.spis.org/uploads/default/original/1X/887f7e402a70666bad1816db2c64fefd698b4b0f.png) [@system](https://forum.spis.org/u/system)\
**Post date:** [11 August 2016 15:31 UTC](https://forum.spis.org/t/archive-solar-array-interactor-model/717/2 "2016-08-11T15:31:00Z")

</div>

Message by **Alessandro Vicini** :  
I try again with the file:

1. Effective area ratio  

1  

1. Basis definition  

 -0.7565 -0.5120 -0.1800  
 1.0000 0.0000 0.0000  
 0.0000 1.0000 0.0000  

1. Solar Array definition  

 -0.7565 -0.5120 -0.0965 -0.4267 0.0000 37.8788 0.0000  
 -0.7565 -0.4267 -0.0965 -0.3413 25.0000 -37.8788 0.0000  
 -0.7565 -0.3413 -0.0965 -0.2560 0.0000 37.8788 0.0000  
 -0.7565 -0.2560 -0.0965 -0.1707 25.0000 -37.8788 0.0000  
 -0.7565 -0.1707 -0.0965 -0.0853 0.0000 37.8788 0.0000  
 -0.7565 -0.0853 -0.0965 0.0000 25.0000 -37.8788 0.0000  
 -0.7565 0.0000 -0.0965 0.0853 0.0000 37.8788 0.0000  
 -0.7565 0.0853 -0.0965 0.1707 25.0000 -37.8788 0.0000  
 -0.7565 0.1707 -0.0965 0.2560 0.0000 37.8788 0.0000  
 -0.7565 0.2560 -0.0965 0.3413 25.0000 -37.8788 0.0000  
 -0.7565 0.3413 -0.0965 0.4267 0.0000 37.8788 0.0000  
 -0.7565 0.4267 -0.0965 0.5120 25.0000 -37.8788 0.0000

---

<div class="post-metadata">

**Author:** ![system](https://forum.spis.org/uploads/default/original/1X/887f7e402a70666bad1816db2c64fefd698b4b0f.png) [@system](https://forum.spis.org/u/system)\
**Post date:** [23 August 2016 09:12 UTC](https://forum.spis.org/t/archive-solar-array-interactor-model/717/3 "2016-08-23T09:12:00Z")

</div>

Message by **Jean-Charles Mateo-Velez** :  
Hi,

1. The effective area ratio is the ratio between the interconnects metallic surfaces and the surface of the panel. Generally it is something like 0.02 or 0.03.

2. Basis definition defines the reference frame of the panel. In your example, the panel is necessarily defined in the X-Y plane 3. The solar array points are defined in the reference basis so the first line indicates that the first point is at X = -0.7565-0.7565 in mesh reference model which is probably not what you want. The simplest settings is : Effective area ratio 0.0X Basis definition 0.0 0.0 -0.1800 --\> you say that the panel is at Z = -0.18 but not changing the X-Y ref point 1.0000 0.0000 0.0000 0.0000 1.0000 0.0000 Solar Array definition -0.7565 -0.5120 -0.0965 -0.4267 0.0000 37.8788 0.0000 -0.7565 -0.4267 -0.0965 -0.3413 25.0000 -37.8788 0.0000 etc

---

<div class="post-metadata">

**Author:** ![system](https://forum.spis.org/uploads/default/original/1X/887f7e402a70666bad1816db2c64fefd698b4b0f.png) [@system](https://forum.spis.org/u/system)\
**Post date:** [30 August 2016 08:35 UTC](https://forum.spis.org/t/archive-solar-array-interactor-model/717/4 "2016-08-30T08:35:00Z")

</div>

Message by **Alessandro Vicini** :  
Thank you very much Jean-Charles, now the model seems to work.  
I get a constant value of potential over the solar panel  
is this what I should expect?

---

<div class="post-metadata">

**Author:** ![system](https://forum.spis.org/uploads/default/original/1X/887f7e402a70666bad1816db2c64fefd698b4b0f.png) [@system](https://forum.spis.org/u/system)\
**Post date:** [13 March 2017 15:14 UTC](https://forum.spis.org/t/archive-solar-array-interactor-model/717/5 "2017-03-13T15:14:00Z")

</div>

Message by **Felicien Filleul** :  
Hi,  
I dig up this thread because as Alessandro I can’t visualize the surface potential distribution implemented by the interconnectors model.  
The model seems to works since I got interactor current as outputs.However, and this is my second concern, the outputs of the interactor model are labeled as “Emitted\_current\_A\_versus\_time\_Interactor1\_SolarArrayInteractor…” whereas they definitively should be collected ones.  
Is there a subtle setting in the local parameters of the corresponding node or are those just bugs of the data miner ?  
Thank you for your help.  
Felicien

---

<div class="post-metadata">

**Author:** ![system](https://forum.spis.org/uploads/default/original/1X/887f7e402a70666bad1816db2c64fefd698b4b0f.png) [@system](https://forum.spis.org/u/system)\
**Post date:** [10 July 2020 12:59 UTC](https://forum.spis.org/t/archive-solar-array-interactor-model/717/6 "2020-07-10T12:59:56Z")

</div>

Closed on 10 July 2020 12:59 UTC


