# \[Archive\] Current Biased Node

**URL:** <https://forum.spis.org/t/archive-current-biased-node/698>\
**Category:** SPIS\
**Created:** [25 May 2017 08:26 UTC](https://forum.spis.org/t/archive-current-biased-node/698 "2017-05-25T08:26:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://forum.spis.org/uploads/default/original/1X/887f7e402a70666bad1816db2c64fefd698b4b0f.png) [@system](https://forum.spis.org/u/system)\
**Post date:** [25 May 2017 08:26 UTC](https://forum.spis.org/t/archive-current-biased-node/698/1 "2017-05-25T08:26:00Z")

</div>

Message by **Millan Diaz-Aguado** :  
Is there a way to current bias a node? I see that in the Circuit I can do voltage, resistance and capacitance, but not current?  
Thanks,  
Millan

---

<div class="post-metadata">

**Author:** ![system](https://forum.spis.org/uploads/default/original/1X/887f7e402a70666bad1816db2c64fefd698b4b0f.png) [@system](https://forum.spis.org/u/system)\
**Post date:** [24 August 2017 14:24 UTC](https://forum.spis.org/t/archive-current-biased-node/698/2 "2017-08-24T14:24:00Z")

</div>

Message by **Sébastien Hess** :  
Hello,  
for the moment it is not possible to do it in the circuit editor (it will be possible in a future version of SPIS).  
But it is possible to put a bias on the surfaces connected to the node.In the group editor, when you select the plasma BC of a group, you can define the ImposedEmitted/CollectedCurrentDensity on this group. From this, you can put a current bias on a node.  
Best Regards,  
Sébastien

---

<div class="post-metadata">

**Author:** ![system](https://forum.spis.org/uploads/default/original/1X/887f7e402a70666bad1816db2c64fefd698b4b0f.png) [@system](https://forum.spis.org/u/system)\
**Post date:** [10 July 2020 12:58 UTC](https://forum.spis.org/t/archive-current-biased-node/698/3 "2020-07-10T12:58:06Z")

</div>