# \[Archive\] 2-D Element - Windows

**URL:** <https://forum.spis.org/t/archive-2-d-element-windows/681>\
**Category:** SPIS\
**Created:** [14 December 2018 19:57 UTC](https://forum.spis.org/t/archive-2-d-element-windows/681 "2018-12-14T19:57:00Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://forum.spis.org/uploads/default/original/1X/887f7e402a70666bad1816db2c64fefd698b4b0f.png) [@system](https://forum.spis.org/u/system)\
**Post date:** [14 December 2018 19:57 UTC](https://forum.spis.org/t/archive-2-d-element-windows/681/1 "2018-12-14T19:57:00Z")

</div>

Message by **Millan Diaz-Aguado** :  
Hi,  
I’m trying to model a 2-D element, but not being very successful. I tried just by doing 2-D element with 2-D mesh original. That did not work out. I looked in the manual and it explained how we need to press the advance button and do a 2-D mesh splitting. The manual explains to select the “non-physical in contact” and select 2-D teared surface. I could not find that 2-D teared surface Mesh Model. I find all the others. Please help?  
Millan

---

<div class="post-metadata">

**Author:** ![system](https://forum.spis.org/uploads/default/original/1X/887f7e402a70666bad1816db2c64fefd698b4b0f.png) [@system](https://forum.spis.org/u/system)\
**Post date:** [14 December 2018 20:07 UTC](https://forum.spis.org/t/archive-2-d-element-windows/681/2 "2018-12-14T20:07:00Z")

</div>

Message by **Millan Diaz-Aguado** :  
So, I found my own solution. The 2-D teared surface is in computational volume. You might want to add that to your manual. It is not under “spacecraft surface group”.Millan

---

<div class="post-metadata">

**Author:** ![system](https://forum.spis.org/uploads/default/original/1X/887f7e402a70666bad1816db2c64fefd698b4b0f.png) [@system](https://forum.spis.org/u/system)\
**Post date:** [20 December 2018 18:12 UTC](https://forum.spis.org/t/archive-2-d-element-windows/681/3 "2018-12-20T18:12:00Z")

</div>

Message by **ruard** :  
Hi,  
Thanks for your feedback. We will add precision in the user manual as you suggested it.  
Best,  
Benjamin

---

<div class="post-metadata">

**Author:** ![system](https://forum.spis.org/uploads/default/original/1X/887f7e402a70666bad1816db2c64fefd698b4b0f.png) [@system](https://forum.spis.org/u/system)\
**Post date:** [10 July 2020 12:56 UTC](https://forum.spis.org/t/archive-2-d-element-windows/681/4 "2020-07-10T12:56:47Z")

</div>

Closed on 10 July 2020 12:56 UTC


